# Desc: Device definitions for Activemedia robots.
# Author: Andrew Howard, Richard Vaughan
# Date: 10 Jun 2002
# CVS: $Id: pioneer.inc,v 1.29 2007-09-11 20:39:51 rtv Exp $


# The Pioneer2DX sonar array
define p2dx_sonar ranger
(
  scount 16

  # define the pose of each transducer [xpos ypos heading]
  spose[0] [ 0.075 0.130 90 ]
  spose[1] [ 0.115 0.115 50 ]
  spose[2] [ 0.150 0.080 30 ]
  spose[3] [ 0.170 0.025 10 ]
  spose[4] [ 0.170 -0.025 -10 ]
  spose[5] [ 0.150 -0.080 -30 ]
  spose[6] [ 0.115 -0.115 -50 ]
  spose[7] [ 0.075 -0.130 -90 ]
  spose[8] [ -0.155 -0.130 -90 ]
  spose[9] [ -0.195 -0.115 -130 ]
  spose[10] [ -0.230 -0.080 -150 ]
  spose[11] [ -0.250 -0.025 -170 ]
  spose[12] [ -0.250 0.025 170 ]
  spose[13] [ -0.230 0.080 150 ]
  spose[14] [ -0.195 0.115 130 ]
  spose[15] [ -0.155 0.130 90 ]	
		
  # define the field of view of each transducer [range_min range_max view_angle]
  sview [0 5.0 15]

  # define the size of each transducer [xsize ysize] in meters
  ssize [0.01 0.05]
)

# a Pioneer 2 or 3 in standard configuration
define pioneer2dx position
(
  # actual size
  size [0.44 0.33]

  # the pioneer's center of rotation is offset from its center of area
  origin [-0.04 0.0 0]

  # draw a nose on the robot so we can see which way it points
  gui_nose 1

  # estimated mass in KG
  mass 15.0 
	
  # this polygon approximates the shape of a pioneer
  polygons 1
  polygon[0].points 8
  polygon[0].point[0] [  0.23  0.05 ]
  polygon[0].point[1] [  0.15  0.15 ]
  polygon[0].point[2] [ -0.15  0.15 ]
  polygon[0].point[3] [ -0.23  0.05 ]
  polygon[0].point[4] [ -0.23 -0.05 ]
  polygon[0].point[5] [ -0.15 -0.15 ]
  polygon[0].point[6] [  0.15 -0.15 ]
  polygon[0].point[7] [  0.23 -0.05 ]

  # differential steering model
  drive "diff"

  # uncomment this line if you want to model real pioneers with SICK
  # lasers, where the laser is taller than the robot
  # laser_return 0

  # use the sonar array defined above
  p2dx_sonar()  
) 

#define pioneer2dx_battery pioneer2dx
#(
#  power( pose [-0.14 0 0] capacity 1000 probe_range 0.50  give 0 give_rate 100 take_rate 100 )
#)

# The AmigoBot sonar array
define amigo_sonar ranger
(
  scount 8
  spose[0] [ 0.073 0.105 90 ]
  spose[1] [ 0.130 0.078 41 ]
  spose[2] [ 0.154 0.030 15 ]
  spose[3] [ 0.154 -0.030 -15 ]
  spose[4] [ 0.130 -0.078 -41 ]
  spose[5] [ 0.073 -0.105 -90 ]
  spose[6] [ -0.146 -0.060 -145 ]
  spose[7] [ -0.146 0.060 145 ]
)

define amigobot position
(
  size [.330 .280]
  #origin [0.0 0.0] # what should this value be? send email to vaughan@sfu.ca.
  amigo_sonar()
)


# define 10 straight bumpers around the edge of the robot
#
# (these angles are correct for p2dx but the offsets are approximate - RTV)
# format: bumper[x] [x y th length radius] (zero radius gives a straight line)
# WARNING: bumpers are not currently supported by Stage>=1.5
# define pioneer2dxbumper bumper
# ( 
#   bumpers10
#   bumper[0] [  0.17 -0.22  -52  0.105 0.0 ]
#   bumper[1] [  0.24 -0.12  -19  0.105 0.0 ]
#   bumper[2] [  0.26  0.00    0  0.105 0.0 ]
#   bumper[3] [  0.24  0.12   19  0.105 0.0 ]
#   bumper[4] [  0.17  0.22   52  0.105 0.0 ]
#   bumper[5] [ -0.25  0.22  128  0.105 0.0 ]
#   bumper[6] [ -0.32  0.12  161  0.105 0.0 ]
#   bumper[7] [ -0.34  0.00  180  0.105 0.0 ]
#   bumper[8] [ -0.32 -0.12  199  0.105 0.0 ]
#   bumper[9] [ -0.25 -0.22  232  0.105 0.0 ]
# )